Products
Our Products
Bitumen 60/70
SG BituFix
SG PatchFix
SG JointFix
SG CrackFix
SG PaintFix
Bitumen 60/70
Penetration Range: Our Penetration Grade Bitumen 60/70 exhibits a penetration value between 60 and 70 under standard test conditions.
Semi-Hard Quality: Classified as a semi-hard penetration grade bitumen, it offers the right balance of durability and versatility.
Versatile Foundation: As one of the most used bitumen grades, it serves as the fundamental material for a wide array of bituminous products.
Road Construction: Count on Bitumen 60/70 for robust road construction and the creation of long-lasting asphalt pavements.
Hot Mix Asphalt: Craft hot mix asphalt with ease, ideal for both base layers and wearing courses.
Adaptability to Mild Climates: Particularly valuable in road projects in mild regions, thanks to its moderate air blowing and penetration characteristics. Explore the diverse applications of Penetration Grade Bitumen 60/70 in various construction projects.
| No. | Testing Item | Unit | Test method | Specification TT27/2014/TT-BGTVT |
|---|---|---|---|---|
| 1 | Penetration at 25℃, 0.1mm, 5s | 0.1mm | TCVN 7495:2005 | 60 - 70 |
| 2 | Penetration Index | Appendix II TT27/2014/TT-BGTVT | -1.5 - +1.0 | |
| 3 | Softening Point (R&D method) | ℃ | TCVN 7497:2005 | Min 46 |
| 4 | Dynamic viscosity at 60 Deg.C, Pa.s | Pa.s | TCVN 8818-5:2011 | Min 180 |
| 5 | Ductility at 25℃, 5cm/min | Cm | TCVN 7496:2005 | Min 100 |
| 6 | Wax Parafin Content | % | TCVN 7503:2005 | Max 2.2 |
| 7 | Flash Point (Cleveland Open Cup) | ℃ | TCVN 7498:2005 | Min 232 |
| 8 | Solubility in Tri-Chloro Ethylene | % | TCVN 7500:2005 | Min 99 |
| 9 | Specific Gravity | g/cm3 | TCVN 7501:2005 | 1.00 – 1.05 |
| 10 | Test on residue from thin film oven test | |||
| 10.1 | Loss on heating at 163℃ for 5 hours | % | ASTM D 1754 | Max 0.8 |
| 10.2 | Penetration of residue, % of original | % | TCVN 7495:2005 | Min 54 |
| 10.3 | Ductility at 25℃, 5cm/min | Cm | TCVN 7496:2005 | Min 50 |
| 11 | Coating criteria (Boiling method) | Level | TCVN 7504:2005 | Min Level 3 |
SG BituFix
Bitumen Emulsion is a water-based binder designed for a wide range of paving and maintenance applications. It’s the smarter, greener choice – ideal for surface dressing, prime coat, tack coat, and cold recycling works.
- Environmental friendly – reduced emissions and energy use
- Strong adhesion and excellent wetting properties
- Rapid setting and curing options available
- Sustainable for both rural and urban road networks
Available in Cationic Grades (RS, MS, SS) to match specific application needs, our emulsions are engineered to perform in any challenging conditions.
| Properties | Calculation Unit | Limit | |||||
|---|---|---|---|---|---|---|---|
| CRS-1 | CRS-2 | CSS-1 | |||||
| Min | Max | Min | Max | Min | Max | ||
| Saybolt Furol Viscosity at 25ºC | SFS | - | - | - | - | 20 | 100 |
| Saybolt Furol Viscosity at 50ºC | SFS | 20 | 100 | 100 | 400 | - | - |
| 24-hour storage stability | % | - | 1 | - | 1 | - | 1 |
| Emulsifier, 35mL, 0.8% dioctyl sodium sulfosuccinate | % | 40 | - | 40 | - | - | - |
| Sieve test | % | - | 0.1 | - | 0.1 | - | 0.1 |
| Distillation experiment | % | ||||||
| Distilled oil by emulsion mass | % | 3 | 3 | ||||
| Amount of residue | % | 60 | - | 65 | - | 57 | - |
| Check the remaining distillation: | |||||||
| Penetration at 250C, 100, 5 seconds | 0.1mm | 100 | 250 | 100 | 250 | 100 | 250 |
| Elongation at 250C, 5cm/min | cm | 40 | - | 40 | - | 40 | - |
| Solubility in Trichloroethylene | % | 97.5 | - | 97.5 | - | 97.5 | - |
SG PatchFix
Cold Mix is the ultimate solution for quick, cost-effective road repairs and patching – no heating, no hassle. Specially formulated for all tropical climate, our cold mix asphalt provides excellent workability and long-lasting performance even in wet or rainy conditions.
- Easy to use – No heating or heavy equipment needed
- Perfect for pothole repairs, edge patching, and rural roads
- Flexible storage and transport – apply whenever, wherever
- Cost-efficient with minimal waste
Whether for emergency repairs or scheduled maintenance, our cold mix saves time and money while delivering dependable results.
| Properties | Specification | Test Method |
|---|---|---|
| Binder Content | 4-6% | ASTM D2172 |
| Marshall Stability | Min. 3.5 kN | ASTM D6927 |
| Workability (Ambient) | 5-40°C | Field Evaluation |
| Rutting Resistance | >90% Retained Stability | MS 30 |
| Residual Binder | Polymer-Modified | Internal Spec |
SG JointFix
Our Bituminous Joint Sealant is engineered to deliver strong, elastic, and weather-resistant sealing for pavement joint, expansion joints, and concrete slabs. Whether used in highways, airports, or bridges, it ensures long-term integrity by absorbing movement and preventing water infiltration.
- High elasticity and adhesion
- Resistant to extreme temperatures and heavy traffic loads
- Ideal for concrete and asphalt joints
- Prevents water ingress and material degradation
| Properties | Specification | Test Method |
|---|---|---|
| Softening Point | >90°C | ASTM D36 |
| Penetration @ 25°C | 30-50 mm | ASTM D5 |
| Flow @ 60°C | <3 mm | ASTM D5329 |
| Resilience @ 25°C | Min. 30% | ASTM D5329 |
| Application Temperature | 170-190°C | Internal Control |
SG CrackFix
Strong cracks today can turn into big repairs tomorrow. Our Crack Sealant is your first line of defense, designed to seal and protect pavement surfaces from water damage, oxidation and structural wear.
- Fast application and rapid curing
- Excellent flow and flexibility for varied crack widths
- UV-resistant and long-lasting
- Minimizes future maintenance costs
Ideal for roadways, car parks, airport runways, and industrial surfaces – our crack sealant extends the life of pavements and keeps surfaces safe and smooth.
| Properties | Specification | Test Method |
|---|---|---|
| Softening Point | >95°C | ASTM D36 |
| Penetration @ 25°C | >200°C | ASTM D3407 |
| Flow @ 60°C | <3 mm | ASTM D5329 |
| Resilience @ 25°C | 25-40 mm | ASTM D5 |
| Application Temperature | 180-200°C | Field Spec |
SG PaintFix
Clear road markings are essential for traffic safety and efficiency. Our PaintFix is engineered for long-lasting performance, offering high visibility and durability on roads, highways, and high-traffic zones.
- Rapid application and fast curing
- High reflectivity with glass bead integration
- Resistant to wear, weather, and UV exposure
- Complies with LKR, BS, and ASTM standards
Perfect for lane markings, pedestrian crossings, arrows, symbols, and more – our thermoplastic paint ensures consistent visibility in all conditions, helping to guide, protect, and organize road users with confidence.
| Properties | TCVN 8791-2011 Requirement | Test Method |
|---|---|---|
| Color | Sample | ASTM D 6628-03 |
| Drying time (with 2mm line thickness) Air temperature 32±2ºC | ≤ 2 minutes | TCVN 2096:1993 |
| Luminance | ≥ 50% | TCVN 8791:2011 |
| Heat resistance | ≥ 45% | TCVN 8791:2011 |
| Softening temperature | ≥ 85% | TCVN 8791:2011 |
| Abrasion | ≤ 0.4g after 500 revolutions | TCVN 8791:2011 |
| Fire resistance | ≤ 10% ở 40ºC | TCVN 8791:2011 |
| Density | 1.9-2.2 | TCVN 8791:2011 |
| Adhesion | > 1.24 MPa | ASTM D4541 |
| Glass bead content | > 20% | TCVN 8791:2011 |
| Storage time | 18 months | |
| Maximum working temperature | 200ºC - 220ºC | |
| Maximum safe temperature | 230ºC |